60mm Eye to Eye Trailer Shackle Spring Hanger Kit. High Tensile Greasable Bolts W182 Shot peening is a cold

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites

Mounting Hole Centre - 160mm

250MM EXTENSION

THIS STUB AXLE USED ON MANY TRAILER MANUFACTURERS AUSTRALIA WIDE

Size: L x 910mm

60mm Eye to Eye Trailer Shackle Spring Hanger Kit. High Tensile Greasable Bolts W182 Shot peening is a coldHANGER KIT TO SUIT 60mm EYE TO EYE SPRINGS ALL HIGH TENSILE GREASABLE BOLTS IN THIS KIT 2X REAR SHACKLE HANGERS. 60mm wide WITH DOUBLE STRENGTH PLATES WELDED. 5 8"5MM THICK SOLID EYE BUSH 2X FRONT EYE HANGERS. 8MM THICK. 40MM WIDE. APPROX 61MM ID. 5 8" BOLT HOLES. APPROX 62MM HIGH 6X 5 8"X 110MM HIGH TENSILE ZINC FINISH SHACKLE BOLTS WITH GREASE NIPPLES & NYLOC NUTS. 27MM THREAD 4X 60MM SHACKLE PLATES. 8MM THICK. HOLE CENTRES 65MM