16 Gauge Dimple Plate Gussets 12" and 24" long Hole Size:3.00 This will also work with

This will also work with the stock heater grid and intake horn or any after market intake horn as well

All of our tables and fixtures are modular across all part numbers & sizes and are all manufactured using the industry standard 5/8 (16mm) on 2

& 7" axle stand offs (measured from the center of the air bag to the face of the axle tube)

These can also be ordered in a custom configuration

With this listing you will get:

16 Gauge Dimple Plate Gussets 12" and 24" long Hole Size:3.00 This will also work withCNC laser cut dimple gusset plates now in stock In every size dimple from 1 2" up to 3. 00" in the 24" version. They are 16 gauge mild steel. Not the 18 gauge that other sellers are passing off They are available 12" and 24" long and vary in width with each size dimple. All holes are in perfect alignment and spacing. There is extra material on the ends and can be trimmed to fit your needs. We also have some hole sizes in stock in a 12" long version.