#14 HSS Spiral Flute Taper Pin Reamer BoltsandNuts.com Part Number DWCA1322

Part Number DWCA1322

Part Number: 50F600HCSSS/316

the joint rotates smoothly and continuously at a maximum 30-degree angle • Adapter – Attach the adapter to your 1/4 inch drive tools and connect it to 3/8 inch drive sockets • Works With Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole allow for compatibility with both drive tool anvil types • Corrosion-Resistant Coating – All items in this set have a corrosion-resistant manganese phosphate coating

Part Number: assortment-kit-292453 Pieces - Coarse Thread

Part Number: BIT-DEWSFC7/8-100

#14 HSS Spiral Flute Taper Pin Reamer BoltsandNuts.com Part Number DWCA1322Product Description Tapered reamers turn a straight hole into a tapered hole into which standard taper pins will fit. The straight flute and spiral flute reamers are generally used by hand while the helical flute is designed for machine use. The square on the shanks of the straight and spiral fluted are suitable for holding in a tap wrench or vise. The straight flute taper pin reamer is recommended for most materials. The spiral flute taper pin reamer