1WT_8SSP_3_SEQ_3m_4w: Sequenced 1-wire temperature sensor with 3 inch stainless steel probe and 3m cable. molex VoIP and Intercom systems and

VoIP and Intercom systems and traditional microphone/speaker or amplifiers

you have the option to connect the sensor in 3-wire mode with a separate Vdd wire or you can tie the Vdd wire and the Data wire together to connect the sensor in 2-wire mode

Ethersound (ES-100/Spkr) support enables the devices to be used as a single channel receiver/decoder in real-time audio distribution applications which target ultra low latency for live audio

711 and MP3

Part #: MBus_io12_LCD

1WT_8SSP_3_SEQ_3m_4w: Sequenced 1-wire temperature sensor with 3 inch stainless steel probe and 3m cable. molex VoIP and Intercom systems andPart #: 1WT_8SSP_3_SEQ_3m_4w Part Number: 1WT_8SSP_3_SEQ_3m_4w. The sensor has a 3 inch long, 8mm diameter, stainless steel sequenced 1 wire temperature probe with DS28EA00U chip and a jacketed 3m long cable with four 22AWG stranded conductors. NOTE: this sensor is the same as part # 1WT_8SSP_3_SEQ_30cm_4w, except it has a 3m cable. This 1 wire temperature sensor should be used in any temperature measurement application in which it may be useful to be